|
AutoEnginuity Enhanced Mercedes (Requires ST06)
AutoEnginuity Enhanced Mercedes (Requires ST06)
Enhanced interface for Mercedes (EI17) 1998-2015
The Mercedes interface supports thousands of sensors and hundreds of bi-directional controls for systems such as DME, EGS, ABS, AAC, BAS, SRS, WSS, EWS, CGW, ICM, DAS, MRM, LCP, UCP, OCP, SAM, and dozens more body and chassis controllers. Support includes systems on both the 16pin OBDII and 38pin interfaces.
The enhanced GM interface coverage is only matched by factory tools; we have support for 6,000+ sensors selected from all 68 systems. Finally, our enhanced GM has support for 2,000+ bi-directional commands and key system-level tests. With bi-directional controls, you will no longer be relegated to being just an observer in the operation of the vehicle--now you can take control of its operation. Support includes dual-wire and single-wire CAN powertrain support.
Live data, bi-directional controls, and trouble code retrieval for the popular M and GL Class (163 / 164 / 166), SLK Class (170 / 171 / 172), C Class (202 / 203 / 204), CLK Class (208 / 209), E Class (210 / 211 / 207 / 212), CL Class (215 / 216), CLS Class (218 / 219), S Class (220 / 221), SL Class (129 / 230 / 231), B Class (245), R Class (251), G Class (463), and V Class (Viano/Sprinter). Trouble code retrieval only for DAS 3 equipped S Class (140) models currently.
Advanced Features:
◾Display Adaptation Values (DME 2.0)
◾Display ECU Information
◾Reporting Status Byte and SubType codes
◾VIN model decoding
◾Support for D- and N-Codes
◾Read and Clear Fault Codes/Events
◾AdBlue (SCRM) support for Sprinter '10 - '14 (906)
System Tests:
◾AIRMATIC GL Class (X166) and SL Class (R231) Level Calibration
Service Functions:
◾Reset Oil Service (ASSYST Plus-based models)
◾Reset Oil Service ('03 and earlier with FSS only) and CLS (219), E (211), GL, GLK, and ML (164) and R Class (251)
◾Reset Service Interval ('03 and earlier with FSS only)
◾Reset General Maintenance (ICM for 204 and X204)
◾Power Window Denormalization for DCM and LCP controllers
◾SBC Deactivation and SBC Activation
◾Rodeo, Pitch, Roll, and Move Towards Calibrated Level functions (ABC, ABC221, and ABC230)
◾Reset Sensor and Mixture Adaptation (ME2.8)
◾Reset ECU
◾Reset Adaptation Values, Cold Start Adaptation Values, and Activate Fuel Pump (ME9.7)
◾Learn Throttle Valve Stop, Teach-In Ethanol Portion, and Reset Ethanol Teach-In Processes (ME9.7)
◾Normalizing of Positioning Motors and Break-In of AC Compressor support for ML and GL Class (164), C Class (204), and R Class (251)
◾Seat Adjustment Motor Actuators Normalization for ESA controllers
◾Reset Quantity Mean Value Adaptation Data (CDI2 - CDI5)
◾Re-Initialization of AdBlue Range (CDI6)
◾Reset Transmission Adaptations (EGS52, EGS53, and VGS2)
◾Wheel ID Registration for E Class (207,212), GLK / GL / ML Class (164), and S Class (221)
◾Teach-In Component Yaw Rate and Longitudinal Sensor B24/15 (212)
◾TPMS Write Identification Numbers for SL Class '12 - '14 (231), SLK Class '11 - '14 (R172), M Class '12 - '14 (166), and GL Class '13 - '14 (X166)
◾Reset Offset Value of Signal Steering Angle for E Class '10 - '14 (W212), CLS Class '11 - '14 (W218), SLK Class '11 - '14 (R172)
Call 248-850-7690 for Pricing and Availability
|
|
Login into your account now.
Guest
Type in your email in the box below and we will send you updates with our
special offerings.
| | |
|
There are no mailing lists at this time.
| |
| | |
|
|
|